Step Four

Feature leaf pattern

Place a 6mm Czech glass pearl on cord 9 plus a few smaller beads on a couple of the other cords; this will give you an indication ol the angle the first leaf seam will need to be. Using cord I as the filler cord, tie a DHH seam using cords 2 to 9 as tying cords, angling it away Irom the previous Dl III seam in Step 3.x

Using cord 8 as the filler cord, tie a DHH seam tying with cords 7 to I, again position directly under the previous seam. Repeal Using the following sequence: Filler cord 7, tying cords 6 to I; filler cord 6, tying cords 5 to 1; filler cord 5, tying cords 4 to I; filler cord 4, lying cords 3 to I; filler cord 3, tying cords 2 to I

To create the second side of the leaf, do a U-turn with the filler cord you just used (which is now cord 1)

Use this cord 1 as the next filler cord; tie a DHH seam using tying cords 2-3-4 directly under the previous seam. Repeat using the following sequence: Filler cord 1, tying cords 2 to 5; filler cord 1, lying cords 2 to 6; liller cord I, tying cords 2 to 7; filler cord I, tying cords 2 to 8; filler cord I, tying cords 2 to 9. Leaf is now complete.

0 0

Post a comment